|
Model: Icom F4161DS 71 RC
|
Icom F4161DS 71 RC - 5W, 512C UHF(400-470MHz), LTRŪ/Conventional/Digital Multi-Mode Land Mobile Two Way Radio w/UT126 Installed (Enables 6.25kHz Digital), w/Rapid Charger BC-16001, No Keypad
Two-Way Radio, Handheld, UHF (400-470MHz), 5 Watt, 512 Channel, PC Programmable, MDC1200, Analog and Digital Technology,
Product
Specifications:
5W
512C (128 Zones)
UHF
Basic LTRŪ/conventional
mode operation - Both LTRŪ trunking and conventional channels are programmable
on a radio. Group, selective (DTMF), and phone call are available in LTRŪ
mode
Most popular
signalings built-in - The 2-Tone, 5-Tone, CTCSS, DTCS and MDC signaling capabilities
are built-in for group communication or selective calling. The radio can decode
ten 2-Tone codes or eight 5-Tone codes on a channel. When a matched tone is
received, the following actions are programmable for each code
- Beep Sound
- Bell Icom
- Answer back
call
- Radio stun/kill/revive
- Scan
MDC 1200 Compatible
- PTT ID
- SelCall
- Radio check
- Radio stun/revive
- 500 Aliases
- Status message/request
- Call alert
- Emergency,
emergency mic monitoring
IDAS system
digital mode ready - The IDAS (Icom Digital Advanced System) is Icoms digital
land mobile radio system using the NXDN common air interface. It has useful
calling features including selective calling, status message, radio stun/kill/revive,
etc.
IP55 dust-protection
and water jet resistance
Voting mode
scanning - The voting mode scanning detects the signal strength level of repeater
stations and automatically selects the strongest station, useful for roaming
between 2 or more repeater sites. Once you program the voting mode to a memory
zone, you can easily start voting mode operation by changing the zone setting
Full dot-matrix
LCD - Using a large full dot-matrix LCD (32 18 mm), the IC-F3161/D series
shows upper and lower case characters clearly. The display setting is selectable
from 1 line, 12 characters or 2 lines 24 characters via programming. The bottom
row shows assigned functions to the [P0] to [P3] buttons.
Enhanced audio
- The IC-F3161/D series employs a BTL amplifier that increases the audio output
and the built-in audio compander provides clear, low noise communications.
Lone worker
function - When the radio is not operated for a preset period, a beep sounds
and a button push is required. If no button is pushed within that preset time,
an emergency signal automatically transmits and alerts your co-worker or dispatcher
to any potential trouble
Built-in inversion-type
voice scrambler - The built-in inversion type voice scrambler* provides secure
conversation as standard. When a more secure system is required, the 32 code
non-rolling-type voice scrambler UT-109R and 1020 code rolling type UT-110R
are available as an option
8 DTMF autodial
memories
2 step reduced
power setting
Power on password
Busy, repeater
lockout functions
Escalating alarm
Mode dependent
scan
Surveillance
function temporarily turns off the LED backlight and beep sound
Flash CPU for
future upgrade and more...
In
the box:
Antenna - FASC72U
Battery - BP232N
Belt Clip -
MB94
Charger - BC160
01
Card - UT126
This radio
requires FCC Licensing. Please refer to our FCC
Link.
This is a PC
Programmable Radio. The requires CPS Programming Software, Cables and some
Technical expertise. Please select from the Programming Options below.
 |
x10
Connector Compatibility
Style: Multi
Pin |
| |
Icom
- Commercial
- F30G,
F30GT, F30GS, F31G, F31GS, F31GT, F40G, F40GS, F40GT, F41G, F50, F50V,
F51, F60, F60V, F61, F70, F70S, F70DT, F80, F80DT, F80S, M87, M88,
F3061, F4061, F3061, F3161, F4161
- Marine
- IC-M88
|
|
|
F4161, F4161DS, F4161DS 71 RC, F4161DS71RC
|
|
Home | About
